Hello everyone,
Following the revamp of the shop, I’ve noticed that the cost of restocking the stock each day is higher than the daily takings. Before posting, I checked with several managers who’ve had the same issue. Could this be linked to the workshop that needs building?
If that’s the case, it doesn’t seem logical to me that the shop, as it stands (without upgrading the workshop), should be operating at a loss.
Furthermore, in the shop tab, there are two lines relating to stock. Is this a scripting error, or should we now consider two distinct types of stock?
Thank you in advance for your feedback.

Perhaps the turnover figures aren’t up to date yet?

Galywat: Peut être que le chiffre d'affaire est pas encore à jour ?

Let’s wait and see what tomorrow’s turnover figures are

Great news – it’s been a while.

Stock update this morning: 66 items totalling over 400,000. Spot the mistake – could someone explain it to me, please? Thanks

Could it be a change to the purchase price??

There’s still plenty to discover about this mechanism, which has only just been overhauled.
Shall we give ourselves time to get to grips with it all?
And if necessary, there’s no doubt that adjustments will be made.

What’s more, Aymeric45 seems to have spent several days on this topic. It’s probably been carefully balanced, though. Let’s hope so.
But there’s still plenty of data to analyse before drawing any conclusions :)

This week, the shop is costing me more than it’s bringing in.

I’ve noticed an error when restocking the shop: when I try to restock 70,000 units, the game only counts 65,000, and at an exorbitant price.
Perhaps we don’t have all the information, but I find it hard to explain this.

Let’s wait a few days before getting alarmed, but it is surprising.

There is also a display error in the shop; the stock levels appear on two lines:

realnico58: Il y a également un bug d’affichage dans la boutique, le stock apparaît sur 2 lignes :

Well, actually, there might be a ‘bug’ here.
The two lines probably refer to two separate stock items:
the ‘items’ stock for the first line, and the ‘materials’ stock for the second line.

The problem, Aymeric, is that when you click on ‘restock the shop’, I think it restocks both lines.

For my part, I can’t buy any materials because my stock is “full”. However, I can assure you that I don’t have any materials in stock; I’ve never bought any (and so it’s impossible to buy any)

Either the stock capacity is shared between items and materials – in which case one line needs to be removed – or there’s a glitch, with the ‘item’ value taking the capacity of the ‘materials’

PS: Good luck to those who don’t have the Atelier in understanding what I’ve just said, lol

The stock is shared between the two.

#shop?factory&warehouse&r

Blagoje Vidinic: Le stock est commun aux deux.

Boutique+matières < capacité

#shop?factory&warehouse&r

At the moment, yes.
But that means the two lines mentioned above were based on two assumptions.
Either separate stock levels (in which case there’s a bug)
Or a shared stock level (in which case one line needs to be removed)

That was the point I was making

The simplest thing would be a tutorial explaining exactly what to do... Because at the moment it’s all a bit vague...

It would also be worth pointing out that when you scrap a machine, you have to redo all the upgrades, and it doesn’t actually free up any space in the workshop… That would save you from throwing several million down the drain 🙃

Magpie: Actuellement, oui.
Mais du coup, les 2 lignes mentionnées plus haut soumettaient 2 hypothèses.
Soit une séparation des stocks (dans ce cas il y'a bug)
Soit un stock commun (dans ce cas il faut supprimer une ligne)

C'était en ce sens que je le soulignais

Two different stocks would clearly be better

Alex': Ça serait aussi bien de préciser, quand on supprime une machine on doit refaire toutes les améliorations et ça ne libère juste pas une place dans l'atelier ... Ça éviterait de mettre plusieurs millions a la poubelle 🙃

Yes, it seems logical to allow the resale of production equipment, even at a second-hand price, rather than simply scrapping it.

Azby: Oui ça parait logique de permettre la revente de l'outil de production, même au tarif occasion, plutôt que de le bazarder purement et simplement.

Exactly!

And anyway, you do have a ‘bin’ logo, but there’s no explanation, no warning… It really ought to be clearer about the consequences… Nearly 18 million in the bin

Or is there a way to increase the stock level? I can’t seem to find that function any more.

18 million, Alex???? Unbelievable.....

Having two separate stock levels would be good, especially as for those who filled them in automatically, everything has been filled in
Besides, raw material prices change every day, by as much as -30/+30 per cent, I believe. So it’s a shame to fill these stock levels at exorbitant prices

Doudou: 18 millions Alex ???? Incroyable.....

More or less because I upgraded three machines to the max and it came to €54 million 😅

What’s the maximum cb it goes up to?

Level 10, but the final levels cost millions

OK, thanks.
I produced some whistles this morning. But there’s no mention anywhere that they’re of a higher quality. They’re just added to the standard stock and sold in the shop at the usual price. Is that normal?

Blagoje Vidinic: Le stock est commun aux deux.

Boutique+matières < capacité

#shop?factory&warehouse&r

When we buy raw materials… but when we make them ourselves, they’re out of stock

Ballounet: Ok merci.
Quelq'un à déjà réussi à avoir des points R&D?

Yeah, I’ve got one because I’ve produced 100 items.
I’m still producing components for the time being. So I’ll have some R&D points later ^^

Blagoje Vidinic: Quand on achète les matières premières... mais quand on les fabrique nous même, elles sont hors stock

I don’t think so. I’m exactly at 100k in my stock and my production has reached capacity. Everything seems to count towards the stock.

I’m going to buy a saucepan because the

The shop has been selling through stock for the past two days (around 10k per day, estimated turnover ~150k), but the financials haven’t shown any corresponding daily turnover since Tuesday morning. Only Monday’s figures seem to have been recorded for me. Am I the only one?

Background to a potential bug: manual restocking followed by automatic restocking on Monday, as stock levels were too low and cannot currently be covered by the workshop alone.

I disabled the shop’s auto-restock feature this morning to ensure consistent turnover.

It’s a shame it’s come to this; it’s one of the few useful features of the VIP package.

Azby: J'ai désactivé le remplissage automatique de la boutique pour obtenir un CA cohérent ce matin.

C'est dommage d'en arriver là, c'est l'une des rares options utiles du VIP.

Yes, and on top of that, it’s virtually impossible to use the auto-restock feature alongside the production of components and products in the workshop, as the stock levels are shared (admittedly, we can now update the stock levels, but it might be useful to have a slider to restock the shop to x per cent)

brewen: La boutique consomme le stock depuis 2 jours (10k/jour environ, CA estimé ~150k), mais ne montre aucun CA journalier en adéquation dans les finances depuis Mardi matin. Seulement la journée de Lundi semble avoir comptée pour moi. Suis-je le seul?

Contexte d'un bug potentiel : remplissage manuel puis auto Lundi ou Mardi, le stock étant trop bas et impossible à couvrir avec l'atelier seul actuellement.

To illustrate my point:

The shop’s profits and expenses for this week and last week.

This shows the daily turnover (profit) of €151k; there’s clearly a problem here (I should be at around €450k after three days, not €158k – the equivalent of a single day’s takings). It’s worth noting that, before the update, I was generating between 0.95–1M in profit per week – that’s €135.7–142.2k per day, for comparison.

Shop stock (93k yesterday, -10k products, +€0)

So there is definitely a bug affecting my sales, at the very least (with a different trigger leading to a similar issue for Azby, which was resolved by removing the VIP auto-assistant), which is preventing sales from generating profit. It’s a bit of a nuisance, especially after spending 30M on a new feature only for none of the features to work… (or perhaps my shop’s been getting raided in the dead of night for the past two days – the club’s going to have to invest a few M in a security service ^^)

Unless I’m mistaken
There’s a display issue here – beyond 1k, the details aren’t showing, even though I have a marker.
It would therefore be easier to follow if, for example, 1100 were displayed.

Doug:

Sauf erreur
Problème d affichage ici, au delà de 1k, il n'y a pas le détail, j'ai pourtant un point
Il serait donc plus simple pour suivre d afficher 1100 par exemple .

It’s been changed :)

Is the flocked shirt available in the flock printing workshop not available?

I can only see my players as an option, which means I can’t have their shirts flocked as there are no flocked shirts in stock (if I’ve understood correctly).

I've got the same problem – you can select a player, but the game won't start...

Could this be a home shirt from the workshop?

I actually made some T-shirts straight after the flocking machine was installed, and it makes no difference...

The flocking workshops should be up and running by now.

Sorry, but it’s still down at the moment...

Yes, it’s finally working for me.
Thanks!

Doudou: Désolé mais c'est toujours à l'arrêt pour le moment....

It works fine for me.

However, the tabs #shop?stock and #shop no longer show the same stock levels

The goal nets on the “stock” tab correspond to the “soft toys” on the “shop” tab.

Hi,

I was making flock-printed shirts for a player who’s been called up to the national team, so my machine is no longer producing his flock-printed shirt. Is there a way to save the design so I don’t have to re-enter it every time he’s called up to the national team?

Is it normal that if you remove a machine to free up a slot, and you’ve set it to a certain level, it resets to 0 as soon as you put it back in place?

Deleting it is the same as destroying it, so, yes, that’s normal.